Outdoor lighting for Dallas homes, one service at a time
Residential outdoor lighting falls into five kinds of work. Each one has its own page with costs and the questions worth asking before you sign anything.
Landscape lighting
This is the classic yard setup. Uplights sit at the base of trees, wash lights spread a soft glow over beds and shrubs, and a few low fixtures mark the edges of the lawn. Most systems run at 12 volts from a transformer connected to an outdoor outlet, with direct-burial cable laid under mulch or in a shallow trench. LED lamps are now the norm. The U.S. Department of Energy says LEDs use up to 90% less energy than old incandescent bulbs and hold up well outdoors. A photocell or timer turns the system on at dusk and off at whatever hour you pick, so nobody has to remember a switch. Our landscape lighting page covers fixture types, layouts and prices.
Architectural lighting
Here the house is the subject. Grazing light runs up a brick or stone wall to show its texture. Small fixtures in the eaves point down at columns, shutters and the front door. The goal is a home that looks finished at night, without glare bouncing into bedroom windows. Some of these fixtures run on 120 volts, and that is electrical work. Read more on architectural lighting.
Patio, deck and pathway lighting
Think of the places people walk and sit. Path lights along the front walk, step lights set into stair risers, bistro strings over the patio table and small lights under deck rails. The point is safe footing and a yard you actually use after 8 p.m. in July. Details live on patio and pathway lighting.
Christmas light installation
A seasonal crew hangs lights on the roofline, wraps trees and hedges and sets wreaths, then returns after the holidays to take everything down. Many packages rent you the lights, so there is nothing to buy or store in the garage. See Christmas light installation for how packages are priced.
Permanent holiday lighting
A slim track along the eave holds LED lights you run from a phone app. Warm white on a normal Tuesday, school colors for a playoff game, red and green in December. No ladder every November. Plenty of owners leave it on warm white most nights and only switch to color for holidays. Learn how it works on permanent holiday lighting.
What outdoor lighting costs in Dallas
Price follows fixture count, fixture quality, how far the wire has to run and whether the job needs new electrical work such as an outlet or circuit. The ranges below are what national cost guides and one Dallas cost page report. Your real price comes from the pro's on-site look and written quote.
| Item | Range reported | Source |
|---|---|---|
| Landscape light, installed, per fixture | $80 to $300 | HomeGuide |
| Low-voltage landscape light, per fixture | $100 to $150 | Angi |
| System of 10 to 20 lights | $800 to $6,000 | HomeGuide |
| Transformer, installed | $200 to $500 | HomeGuide |
| Typical outdoor lighting job, Dallas | $195 to $1,440 | HomeAdvisor |
| Seasonal holiday lights, installed | $2.50 to $5.00 per linear foot | HomeGuide |
| Permanent roofline lights, installed | $20 to $40 per linear foot | HomeGuide |
Angi puts the average landscape lighting project at about $4,000, with most landing between $3,000 and $6,000. The HomeAdvisor Dallas figure is much lower because it mixes in small jobs like a single fixture. Our outdoor lighting cost page explains what pushes a quote up or down.
How it works
- Use the form. Tell us your part of town, what you want lit and your timing. A line about trees, beds, steps or roofline length helps.
- We match you with a pro. Your request goes to an independent local outdoor lighting pro who serves your area.
- On-site look. The pro walks the property, checks where power is, measures wire runs and talks through what you want to see at night. Some pros set up a few test fixtures so you can see the effect, so ask.
- Written quote. Fixture count and type, transformer size, wire runs, controls and any electrical work, all on paper.
- You decide. Sign, compare it with another quote or walk away. We do not push.
The form asks only for what a pro needs to get started: your name, how to reach you, your ZIP code and a few words about the project. Leave out anything you would not want a contractor to see. If you are unsure which service fits, describe the result you want, such as "light the oak and the front walk," and let the pro sort out the fixtures.
Licensing, permits and digging
Texas treats electrical work seriously. The Texas Department of Licensing and Regulation (TDLR) says anyone who performs electrical work in the state must be licensed, unless an exemption applies. TDLR's own exemption list includes landscapers working on low-voltage exterior lighting, but it excludes the power source. So the fixtures and 12 volt cable may be installed by a lighting or landscape pro, while a new outlet, circuit or 120 volt fixture calls for a licensed electrician. TDLR also notes that city rules can override those exemptions.
- Dallas permits. The City of Dallas permit guide says most electrical permits must be obtained by a contractor registered as an electrical contractor with the city. Ask the pro whether your job needs one.
- Call before digging. Texas811 says state law requires you or your contractor to contact 811 two business days before digging, and the service is free.
- Neighbors and the night sky. DarkSky International's lighting principles ask for light that is useful, targeted, low level, controlled and warm colored. In plain terms: aim fixtures down or shield them, skip the stadium glare and use timers.
Where we serve
Requests come in from across Dallas and the suburbs around it. A few of the areas we cover are Highland Park, University Park, Preston Hollow, Lakewood, Lake Highlands and Richardson. The full list, grouped by direction, is on our service areas page. If your town is not listed, you can still send a request with your ZIP code.
Why go through a referral service
We are not a lighting company. We own no trucks, employ no installers and do not hang a single fixture. What we do is simple: take one clear request and put it in front of an independent local pro whose work fits it, so you skip a round of cold calls. Sending a request costs you nothing. Lighting pros may pay us for referrals, and our referral disclosure says so. Before you hire, check the pro's license, insurance and references yourself. That step belongs to you, and it matters.
Outdoor lighting questions
Do I need a licensed electrician for landscape lighting in Dallas?
Not always for the low-voltage part. TDLR exempts landscapers working on low-voltage exterior lighting, but not the power source. A new outdoor outlet, a new circuit or any 120 volt fixture is electrical work for a licensed electrician, and Dallas permit rules can apply.
Is low-voltage LED bright enough to light a two-story house?
Usually, yes. Brightness depends on the fixture, its beam spread and where it sits, not the 12 volt supply. A good pro picks fixtures for the wall height and shows you the effect before final placement.
How many lights does a typical yard use?
There is no fixed number. HomeGuide prices typical systems at 10 to 20 lights. A small front yard with a walk and two trees may need fewer, and a deep lot with a long drive may need more.
Can outdoor lights turn on by themselves at dusk?
Yes. The Department of Energy says photosensors work well for all kinds of outdoor lighting. A common setup pairs a photosensor that turns lights on at dusk with a timer that shuts them off later. Many newer systems also offer phone app control.
Will outdoor lighting raise my electric bill much?
Not by much with LED. HomeGuide estimates outdoor lighting costs about $20 to $60 a year to run. Older halogen systems draw far more, which is one reason people retrofit to LED.
Is Lanternway Outdoor Lighting the company that installs the lights?
No. We are a referral service. Your request goes to an independent local pro who quotes and does the work. Your agreement is with that pro, not with us.
Can one pro handle landscape lights and holiday lights?
Some do both, and some only do one. Say in the form which jobs you want quoted. If one pro does not cover both, you may get separate quotes for each.
What happens to my details after I send the form?
We pass your request to the pro it is matched with so they can reach you about your project. We do not sell your information. The privacy policy has the details.